Switchgear and Protective Devices
THIẾT BỊ ĐÓNG CẮT VÀ BẢO VỆ
Course description
This course provides fundamental and advanced knowledge of switchgear and protection systems in power networks from low voltage to medium/high voltage levels. The course emphasizes the analysis of functions, structures, and operating principles of switching and protective devices, including related physical phenomena such as electric arc, thermal effects, electrodynamic forces, insulation coordination, and operational reliability and safety requirements. Students will learn methods for calculation, selection, and performance verification of switchgear and protection devices (CB/MCB/MCCB, contactors, protective relays, circuit breakers, disconnectors, fuses, surge arresters, CTs/VTs, etc.) in compliance with relevant IEC/IEEE standards. Practical skills are developed through exercises, group projects, and laboratory sessions, enabling students to evaluate equipment datasheets, design protection schemes, and propose appropriate technical solutions for real-world power system applications.
Tiếng Việt
Học phần Thiết bị đóng cắt và bảo vệ trang bị cho người học các kiến thức nền tảng và chuyên sâu về thiết bị đóng cắt, thiết bị bảo vệ và phối hợp bảo vệ trong hệ thống điện từ hạ áp đến trung/cao áp. Nội dung tập trung vào việc phân tích chức năng, cấu tạo, nguyên lý hoạt động, các hiện tượng vật lý liên quan như hồ quang điện, phát nóng, lực điện từ, cách điện, và các yêu cầu về an toàn – độ tin cậy vận hành. Học phần đồng thời hướng dẫn phương pháp tính toán – lựa chọn – kiểm tra khả năng làm việc của các thiết bị đóng cắt và bảo vệ (CB/MCB/MCCB, contactor, relay bảo vệ, máy cắt, dao cách ly, cầu chì, chống sét van, biến dòng/biến điện áp đo lường – bảo vệ, v.v.) theo các tiêu chuẩn kỹ thuật hiện hành (IEC/IEEE). Người học được rèn luyện kỹ năng thực hành thông qua bài tập, bài tập lớn và thí nghiệm, nhằm hình thành năng lực đánh giá kỹ thuật, đọc hiểu tài liệu thiết bị, lựa chọn cấu hình bảo vệ và đề xuất giải pháp phù hợp cho các bài toán thực tế trong lưới điện và hệ thống cung cấp điện công nghiệp.
Course Learning Outcomes (CLOs) 4
Click each outcome to see the translation, mapped PLOs and contribution level.
-
CLO1 Describe thermal, magnetic, and electric arc phenomena in switchgear and protective devices.
Mô tả các hiện tượng nhiệt, từ và hồ quang điện trong thiết bị đóng cắt và bảo vệ.
PLO 01 RPLO 02 RPLO 05 R -
CLO2 Explain the structure and operating principles of low-voltage and high-voltage switchgear and protective devices.
Giải thích cấu tạo và nguyên lý làm việc của các thiết bị đóng cắt và bảo vệ hạ áp/cao áp.
PLO 02 RPLO 03 RPLO 05 R -
CLO3 Calculate, select, and verify switchgear and protective devices in accordance with IEC/IEEE standards.
Tính toán, lựa chọn và kiểm tra thiết bị đóng cắt và bảo vệ theo tiêu chuẩn IEC/IEEE.
PLO 01 MPLO 02 MPLO 03 MPLO 04 MPLO 05 M -
CLO4 Conduct laboratory experiments, work in teams, and present technical reports on switchgear and protective devices.
Thực hành thí nghiệm, làm việc nhóm và trình bày báo cáo kỹ thuật về thiết bị đóng cắt và bảo vệ.
PLO 06 MPLO 07 MPLO 08 M
Assessment
| Component | Weight | Timing |
|---|---|---|
| Thi cuối kỳ (Final Examination) | 50.0% | Tuần 16 (Week 14) |
| Tham dự trên lớp (Class Participation) | 10.0% | Toàn bộ quá trình học (Throughout the course) |
| Kiểm tra trên lớp | 10.0% | Tuần 5 |
| Bài tập nhóm (Group Project) | 30.0% | Tuần 9 (Week 9) |
Learning materials
Required
- [1] Khí cụ điện Quyển 1, Phạm Văn Chới, 2023
- [2] Khí cụ điện Quyển 2, Phạm Văn Chới, 2023
- [3] Khí cụ điện Quyển 3, Phạm Văn Chới, 2023
References
- [1] Bảo vệ các hệ thống điện Quyển 1, Trần Đình Long, 2023
- [2] Bảo vệ các hệ thống điện Quyển 2, Trần Đình Long, 2023
- [3] Bảo vệ các hệ thống điện Quyển 3, Trần Đình Long, 2023